NetComm YML-O-3G19W Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 55

background image

YML-O-3G19W

3G WiFi Router User Guide

www.netcomm.com.au

49

NETCOMM LIBERTY™ SERIES

- 3G WiFi Router

The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of
exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during

normal operation.

Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

IC Important Note

IC Radiation Exposure Statement:

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be

installed and operated with minimum distance 20cm between the radiator & your body.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. The County
Code Selection feature is disabled for products marketed in the US/Canada.

Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada.

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically

radiated power (EIRP) is not more than that required for successful communication.

This device has been designed to operate with an antenna having a maximum gain of 4 dBi. Antenna having a higher gain is strictly

prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically

radiated power (e.i.r.p.) is not more than that permitted for successful communication.

Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

«
...
47
48
49
50
51
...
»

Содержание YML-O-3G19W
























































Отзывы:

Нет отзывов

Похожие инструкции для YML-O-3G19W

Бренд: Raymarine Страницы: 20

Бренд: Ubiquiti Страницы: 12

Бренд: Voza Страницы: 11

Бренд: Z-Com Страницы: 66

Бренд: GROM Audio Страницы: 4

Бренд: TP-Link Страницы: 35

Бренд: Aruba Страницы: 2

YLS0056A-E080040

Бренд: THOMSON Страницы: 38

802.11g Wireless Access Point WAP253

Бренд: Abocom Страницы: 1

Бренд: 4next Страницы: 2

Cable/DSL Wireless Broadband4-Port Router

Бренд: Aztech Страницы: 25

Бренд: Brite View Страницы: 40

AirStation WHR3-G54

Бренд: Buffalo Страницы: 10

Бренд: Comcast Страницы: 51

Бренд: 4IPNET Страницы: 15

Бренд: 4IPNET Страницы: 16

Бренд: P2 MOBILE TECHNOLOGIES LIMITED Страницы: 5

Бренд: HPE Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды