NetComm YML-O-3G19W Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 55

background image

YML-O-3G19W

3G WiFi Router User Guide

www.netcomm.com.au

27

NETCOMM LIBERTY™ SERIES

- 3G WiFi Router

6.1.3 Restore Default

The following screen appears when selecting Restore Default. By clicking on the Restore Default Settings button, you can restore your
Routers default firmware settings. To restore system settings, reboot your Router

NOTE:

The default settings can be found in section 3.1 Default Settings.

Once you have selected the Restore Default Settings button, the following screen will appear. Close the window and wait 2 minutes

before reopening your browser. If required, reconfigure your PCs IP address to match your new configuration (see section 3.2 TCP/IP
Settings for details).

After a successful reboot, the browser will return to the Device Info screen. If the browser does not refresh to the default screen, close
and restart the browser.

NOTE:

The Restore Default function has the same effect as the reset button. The device board hardware and the boot loader support the reset to default button. If the

reset button is continuously pushed for more than 5 seconds (and not more than 12 seconds), the boot loader will erase the configuration settings saved on flash

memory.

6.1.4 Update Firmware

The following screen appears when selecting Update Firmware. By following the steps on the page, you can update your Routers

firmware. Manual device upgrades from a locally stored file can also be performed.

1.

Obtain an updated software image file.

2.

Enter the path and filename of the firmware image file in the Software File Name field or click the Browse button to locate the
image file.

3.

Click the Update Firmware button once to upload and install the file.

NOTE:

The update process will take about 2 minutes to complete. The Router will reboot and the browser window will refresh to the default screen upon successful

installation.

It is recommended that you compare the Software Version at the top of the Basic screen (WUI homepage) with the firmware version
installed, to confirm the installation was successful.

«
...
25
26
27
28
29
...
»

Содержание YML-O-3G19W
























































Отзывы:

Нет отзывов

Похожие инструкции для YML-O-3G19W

Бренд: Ebyte Страницы: 14

Бренд: Hirschmann Страницы: 42

Бренд: Shenzhen Hongdian Technologies Страницы: 135

Бренд: One Touch Страницы: 12

Бренд: XINDAO Страницы: 20

Бренд: Arista Страницы: 14

Бренд: Linksys Страницы: 40

Бренд: D-Link Страницы: 16

Бренд: D-Link Страницы: 10

Бренд: D-Link Страницы: 32

dlinkgo GO-RTW-N300

Бренд: D-Link Страницы: 3

Бренд: D-Link Страницы: 72

Бренд: D-Link Страницы: 32

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 73

DPG-2100 - Wireless Presentation Gateway

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 4

dlinkgo GO-RTW-N300

Бренд: D-Link Страницы: 101

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды