V400 Series VoIP Gateway User Guide
41
YML832 Rev1
Advanced Options
NOTE: There are two levels to enter Web. Administrator is able to change all
settings. Web UI only changes some settings.
•
Administrator’s name and Password:
Enter administrator name and password, which has the
highest level of control of the gateway.
•
Web UI Login ID and Web UI/IVR Password:
Enter login ID and password when you log into the
Web interface/IVR of the gateway as a normal user.
•
Web UI auto log out:
If a user does not act within the effective time range when logging into the
web interface, the user will be disconnected from the web page to allow others to login.
•
Dial Wait Timeout:
Use it to set the waiting time for the user’s first key pressing when dialing a
number. The user will hear a busy tone if he/she does not press the first key within the set time
frame.
•
Inter Digits Timeout:
Set the waiting time between each key pressing. The entered numbers will
be dialed after the timeout.
•
Minimum DTMF ON Length (Dial on)/ Minimum DTMF OFF Length (Dial off - between
tones):
Used to set dial tone when a call is being diverted to another extension.
•
DTMF Detection Sensitivity:
Used to adjust the sensitivity of the telephone keys.
•
Enable Out-of-Band DTMF:
To send DTMF keys (0~9, *, #,) follow the RFC2833 rules or via SIP
Info.
NOTE: Out-of-Band DTMF transport method may vary with different VoIP networks,
please contact your VoIP provider for their preferred method.
