| W
ireless
M2M
8
NetComm
Wireless
On the COM port settings window that appears, select
115200
in
the
Bits per second
dropdown menu.
The terminal window should then display indicating a connection is
open to the NTC-4000 Series. This can be tested by entering the
command
at+i
and receiving the response
I/OK
as shown below:
You can now use the enhanced AT command set to configure
or perform tasks on the NTC-4000 Series. Please refer to the AT
Command Set guide for more information on the functions available.
If you are unable to type
at+i
, check that you have selected the correct
COM port to attempt to connect on. This should be the physical COM
port with the supplied DB-9 cable attached.
