| W
ireless
M2M
5
NTC-4000 Series - M2M Intelligent Serial Router
Connecting the Data/
Power cable
Connect the included antenna to the SMA connector of the
NTC-4000.
Plug the included RS-232 data/power cable into the RJ-45
socket of the NTC-4000 and then plug the serial port (DB9) end
of the same cable into the COM port of the device you would like
to connect to.
Connect a compatible power adapter to the DC power jack
(2.1mm barrel) of the RS-232 data/power cable and then plug the
power adapter into a power outlet.
WARNING
Please note: It is not possible to utilise the mini-USB and Serial connection concurrently.
Make sure any open connection on the Serial port is disabled before connecting via the
mini-USB cable.
