| W
ireless
M2M
6
NetComm
Wireless
Power options
The outdoor WiFi Router can be powered via DC power supply or Power over Ethernet (PoE).
DC power option
Your router is provided with a waterproof DC jack allowing it to be powered by a 9~28V DC
power supply.
1.
On the bottom interface panel of the router, locate the DC power port and unscrew the protective
cap to expose the connection pins.
2.
Connect the DC power jack as shown below to the DC power port of the router and turn the metal
securing ring clockwise while pushing the connector in to secure the DC jack in position.
3.
At the other end of the cable, wire the red (po) and black (grounding) wires to your 9~28V
DC power supply source.
Power
1
2
PIN
SIGNAL
DESCRIPTION
1
V+
2
GND
Ground
