NetComm NRB-0206-02-01, Быстрый старт

Страница: 8 / 20

| NRB-0206-02-01
8
b) Compass Calibration mode - The Smart Antenna Tool contains an
electronic compass which periodically requires calibration in order to
provide the most accurate orientation possible.
Calibrate the device at every start and recalibrate when all three LED
indicators flash both red and green twice a second.
To calibrate the device, first isolate it from any magnetic field or metal
structures (for example vehicles, the antenna pole, power lines, etc.) and
then rotate the unit fully through all three axes, see drawings below.
When recalibration is successful, the LEDs will stop flashing.
All LEDs flashing Turn Spin Flip
c) Cell scanning mode - When the Smart Antenna Tool is connected to and
powering an Outdoor Unit (i.e. Power over Ethernet is not provided to the
Outdoor Unit). This mode is used when installing the Outdoor Unit.
Strong signal Medium signal Low signal No cell detected