NetComm NRB-0206-02-01, Быстрый старт

Страница: 12 / 20

| NRB-0206-02-01
12
4. Wait approximately 1 minute for the Outdoor Unit to go through its
boot up process.
5. Using a portable wireless device such as a laptop or tablet, scan for
nearby wireless networks. Connect to the network being broadcast
by the Smart Antenna Tool using the Network Name and Password
which are printed on the label and on the WiFi security card included
in the package.
6. When the wireless connection has been established, use your
wireless device to browse to the IP address of the Smart Antenna Tool
(http://192.168.3.1).
WARNING: When the Smart Antenna Tool is connected to the Outdoor Unit, do not point
the front panel of the Outdoor Unit directly at other people or yourself. Always maintain a
separation distance of 8 inches between any part of your body and the front of the Outdoor
Unit (the official FCC recommendation specifies 20cm separation). We recommend that
you disconnect the PoE cable and Smart Antenna Tool if you are working in proximity to the
Outdoor Unit and it is not required to be on.
NOTE: If the web interface does not show immediately, ensure that you have waited long
enough for the antenna to have completed its boot process.
7. To complete the installation, follow the Installation Guide that comes
with your Outdoor Unit.