Rev.1 - YML653
www.netcomm.com.au
NP7032 - Wireless LAN PC Card
Page 15
Radio:
This function is to turn on or off communication to and from the
NetComm NP7032 - Wireless LAN PC Card.
Other information:
This dialog box shows the Status, Signal Strength and Link
Quality of the NetComm NP7032 - Wireless LAN PC Card. The
Status will show different information when you select the
following operating modes:
Ad-Hoc Mode:
The status bar will show Ready and the linked BSSID, the Signal
Strength and the Link quality will not be active.
Infrastructure Mode: The status bar will show Associated and the linked Access Point
BSSID, the Signal Strength and Link Quality will be shown in the
screen below under the Status of your NetComm NP7032 -
Wireless LAN PC Card.
When the both stations do not have the same Encryption setting,
one Encryption's WEP Key is enabled and the other is disabled.
The status bar will show Enable Encryption to join this BSS or
Disable Encryption to join this BSS.
