Rev. 1 - YML657
www.netcomm.com.au
NP3640 Fast Ethernet Mini Print Server User Guide
Page 69
BiAdmin
For more control and flexibility, or to use NetWare Remote Printer Mode, you can use the
supplied BiAdmin management utility. Provided you have Novell's Client 32 installed, BiAdmin
will allow you to configure the NetWare Server as well as the Print Server.
■
BiAdmin is installed by the Administrator menu option on the CD-ROM.
■
See Section 5 for general information on using BiAdmin.
■
The NetWare Manual (in the Manual\NetWare folder on the CD-ROM) contains detailed
information on using BiAdmin with NetWare Servers.
Other Method
If you are unable to use Windows-based programs for configuration, the following method is
available to configure the Print Server:
Quickset Command-line DOC program, intended only to configure the Print Server for use with
NetWare V2, 3 and 4. This program also has a limited ability to configure the NetWare Server
itself.
■
The program is provided on the CD-ROM, in the Utility folder.
■
The documentation for the program is provided in sub-folders of the Manual folder on the
CD-ROM.
Configuration Data
The Print Server requires the following "General" data, and the data for the mode (Print Server or
Remote Printer) you are using.
General
Device Name
The device name (Default Server Name) is shown on a
sticker on the base of the device. Change this if you
wish. The new name MUST NOT exceed 19 characters,
nor contain any spaces.
Device Password
Default is NULL (no password).
NetWare Mode
Print Server or Remote Printer.
Frame Type
Select the frame types used by your network. (Ethernet
802.2, Ethernet 802.3, Ethernet SNAP, and Ethernet II)
By default, all frame types are enabled.
Novell Remote Printer Mode
Novell Printer Server for P1
NetWare print server to service the Print Server's parallel
port 1.
Novell Print Server Mode
NDS Tree Name
Not applicable.(NetWare NDS mode only)
Print Server NDS Context
Not applicable.(NetWare NDS mode only)
