www.netcomm.com.au
Rev. 1 - YML657
Page 64
NP3640 Fast Ethernet Mini Print Server User Guide
8. Click OK to see the Print Port Configuration screen, as
shown below.
9. Click the Browse Device button, select the desired Print
Server , and click OK.
10. Click OK to return to the Printers folders, and right-click on
the Printer. Ensure that the Work off-line option is NOT
checked. The Printer should no longer be grayed out, and is
ready for use.
Problem No. 3
I connected and configured a WPS (Windows Printing System)
printer as described, but I can't get the print job to print.
Solution No. 3
Printer drivers for WPS printers poll the printer before sending
print data. Since the printer is networked, the printer is not
found and no data is sent. The solution is to add your printer as
a network printer as described in Solution 2 above.Note: The
screens shown in Solution 2 are from Windows 95. Other
versions of Windows may look slightly different, but the process
is identical. If using Window NT or 2000, do NOT enable
Sharing for the printer.
Problem No. 4
When printing from some software applications such as Power
Point, it takes a long time and the print out is incorrect.
Solution No. 4
The problem is due to the printer, which is being configured to
Start printing after the first page is spooled. To change this
setting:· Go to Control Panel - Printers and click on your printer.·
Then select File - Properties - Details.
■
When the Details screen appears, click the Spool Settings
button.
■
When the Spool Settings dialogue box appears, choose Start
printing after last page is spooled and click OK.
Problem No. 5
A printing device connected to the Print Server port cannot print
or prints garbage.
Solution No. 5
Check the following:
■
Cable connection between Print Server and printer.
■
Printer driver in the application program or Windows
matches the printer.
Problem No. 6
The Configuration button on the Printer Status screen in
BiAdmin is grayed out, even though my printer is bi-directional.
Solution No. 6
The button is unavailable if the printer is busy. You must wait
until the printer is idle.
