NETCOMM LIBERTY™ SERIES
-
12
NetComm 3G22WV-I - HSPA+ WiFi Router with Voice User Guide
www.netcomm.com
YML22WVI
Hardware installation
1.
Insert your SIM card (until you hear a click) into the SIM slot.
2.
For voice functionality, connect a standard analogue telephone to the port labelled “Voice” using the RJ-11 cable provided.
3.
Connect the power adapter to the Power socket on the back of the 3G22WV.
4.
Plug the power adapter into the wall socket and switch on the power.
5.
Wait approximately 60 seconds for the 3G22WV to power up.
Connecting via a cable
1.
Connect the Ethernet cable provided to the port marked LAN 1-4 at the back of the 3G22WV.
2.
Connect the other end of the yellow Ethernet cable to your computer.
3.
Wait approximately 30 seconds for the connection to establish.
4.
Open your Web browser and type http://192.168.20.1 into the address bar and press enter.
5.
Follow the steps to set up your 3G22WV.
6.
After the setup process is completed, you will be connected to the Internet.
Connecting wirelessly
1.
Ensure WiFi is enabled on your device (computer/laptop/Smartphone).
2.
Scan for wireless networks in your area and connect to the network name shown on the included Wireless Security Card.
3.
When prompted for your wireless security settings, enter the Wireless security key shown on the included Wireless Security Card.
4.
Wait approximately 30 seconds for the connection to establish.
5.
Open your Web browser and type http://192.168.20.1 into the address bar and press enter.
6.
Follow the steps to set up your 3G22WV.
7.
After the setup process is completed, you will be connected to the Internet.
8.
To connect additional devices via WiFi, repeat steps 1 through 4.
