IFWA-661 Outdoor Wireless Antenna
–
Installation Guide
60 of 63
v1.0 September 20, 2019
© NetComm Wireless 2019
Electrical safety
Accessories
Only use approved accessories.
Do not connect with incompatible products or accessories.
Connection to a car
Seek professional advice when connecting a device interface to the vehicle electrical system.
Distraction
Operating machinery
Full attention must be given to operating the machinery in order to reduce the risk of an accident.
Product handling
You alone are responsible for how you use your device and any consequences of its use.
Do not point the antenna at other people or yourself. Always maintain a separation distance of 1 foot from
any part of your body and the front of the antenna. Use of your device is subject to safety measures
designed to protect users and their environment.
Do not expose your device or its accessories to open flames or lit tobacco products.
Do not drop, throw or try to bend your device or its accessories.
Do not use harsh chemicals, cleaning solvents, or aerosols to clean the device or its accessories.
Do not paint your device or its accessories.
Do not attempt to disassemble your device or its accessories, only authorised personnel must do so.
Do not use or install this product in extremely hot or cold areas. Ensure that the device is installed in an area
where the temperature is within the supported operating temperature range.
Do not use your device in an enclosed environment or where heat dissipation is poor. Prolonged use in such
space may cause excessive heat and raise ambient temperature, which will lead to automatic shutdown of
your device or the disconnection of the mobile network connection for your safety. To use your device
normally again after such shutdown, cool it in a well-ventilated place before turning it on.
Please check local regulations for disposal of electronic products.
Installation and configuration should be performed by trained personnel only.
Do not use or install this product near water to avoid fire or shock hazard.
Arrange power and Ethernet cables in a manner such that they are not likely to be stepped on or have items
placed on them.
Ensure that the voltage and rated current of the power source match the requirements of the device. Do not
connect the device to an inappropriate power source.
