HSPA WiFi Router with Voice-User Guide
YML10WVR
16
www.netcommlimited.com
3G Settings
4.1 3G Service Setup
) '+ % % )
your assistance.
4.1.1 3G
Settings
'+ ) !"#$%
NOTE:
Sections 8.3 and 8.4.2 also provide information about the 3G service.
) ! % %
username and password. Only complete those steps for which you have information and skip the others.
1. If your SIM card is not inserted into the Router, then do so now.
2. ]!# ]!#% ] * "
]| " %
3. Select IP compression and Data compression to be ON or Off. By default they are set to off.
4. Click the Save button to save the new settings.
5. Press the Connect button to reboot the router and to connect to Internet. After reboot, the Device Info for
3G network box in the WUI Basic screen should indicate an active connection, as shown below. The 3G and
Internet LEDs on the front panel of the Router should also be blinking.
" % )"*_ _ "
either case, contact Technical Support for further instructions.
NOTE:
If the LEDs light in an on/off pattern moving from left to right this indicates that your SIM is PIN Locked, please lee PIN Lock Off on page 21 for instruction on how
%
