| W
ireless
M2M
16
Connecting
WiFi devices
The n-Hub runs a wireless access point by default, allowing
you to connect your wireless client devices immediately.
To connect a wireless client to the access point:
1.
On your wireless device, scan for wireless networks
in range. The n-Hub’s SSID (network name) and
password are printed on the Wireless Security Card
included in the box.
2.
Connect to the network name that matches the one listed
on the Wireless Security Card.
3.
When prompted, enter the password as printed on the
Wireless Security Card. Your device connects to the
n-Hub’s access point and can access the Internet and
other devices connected to the n-Hub.
NetComm
Wireless
Wireless Security Card
Keep this card in a secure place for easy access
to your NetComm Wireless M2M device
Wireless Network Name (SSID): XXXX XXXX
Wireless Security Key:
XXXXXXXXXX
Bluetooth Device Name:
XXXXXX
IMEI:
0123456789101112
Connecting
1. Using your device, scan for the
Wireless Network
Name (SSID)
on the other side of this card.
2. When asked for your wireless security settings, enter the
Wireless Security Key
.
Location
NetComm
Wireless
SC-00001 r
ev 2
All manuals and user guides at all-guides.com
all-guides.com
