NetBurner MOD5270, Быстрый старт

Страница: 10 / 15

3 Running the Factory Application 7
Tool Function
NBEclipse Getting Started Guide How to start using NBEclipse.
This is required reading before
using the integrated development
environment (IDE)
NetBurner Runtime Libraries &
uC/OS RTOS Library Reference guides which list the
function libraries available in the
NNDK, as well as for the uC/OS
real-time operating system
Freescale Manual Detailed reference manual for the
Freescale ColdFire
microprocessor
GNU Manuals Manuals for GNU C/C++ libraries,
compiler and linker. This includes
the C/C++ language API functions
NetBurner PC Tools Reference
Guide Reference manual for NetBurner
tools that run on the PC, such as
IPSetup, AutoUpdate, and MTTTY
Platform Reference and Hardware
Schematic NetBurner hardware manuals that
include memory map and design
guides
3 Running the Factory Application
3.1 Plug in the Module
After installating the NNDK software, it’s a good idea to plug in your module
and connect to it to verify that the network and USB driver are properly
configured.
To proceed, carefully insert the NetBurner module in to the non powered
development board that is included with your kit. All network modules plug
in to the board with the Ethernet jack facing the outside edge of the carrier
board. The MOD5213 module is plugs in the board with the BDM connec-
tor facing the prototype area of the development board. If applicable, plug
in an Ethernet cable in to the module.