Installation – Netbiter EC350 Starter Kit
12 (36)
3.5
Connecting the Tank Sensor
Switch off or unplug the power supply before continuing.
For instructions on how to physically install the tank sensor, please refer to
the Netbiter Tank Sensor Installation Guide.
1.
Connect the plug end of the supplied cable to the tank sensor.
2.
Insert the 11–pin connector block into the large connector slot on the
EC350, and a 3–pin connector block into the
RS-485
slot.
Netbiter
®
EasyConnect Starter Kit User Manual
Doc ID: SP1706
Version: 3.00
