Netberg Aurora 710, Руководство по установке

Страница: 6 / 28

1
Chapter 1. Introduction
This guide is to assist the reader with the most basic form of installation and cable connection to
our switches. As there is more than one switch in the Aurora series, the actual port placement
might slightly differ, however, the installation and connection logic are the same for all Netberg
switches.
Package Contents:
• One Netberg Aurora Switch
• Two AC power cords.
• One RS-232-to-RJ45 console cable.
• One pair of frontal rack-mount brackets.
• Four rubber feet with adhesive patches.
• Eight Phillips-head frontal rack-mount bracket screws.
If any of the above mention items was not found inside the package contents of this
switch or are damaged in any way, contact your reseller immediately.