NetApp StorageGRID SG5712, Руководство по установке и обслуживанию оборудования

Страница: 21 / 89

Installing the hardware
Hardware installation entails installing the appliance into a cabinet or rack, connecting the cables,
and applying power.
Steps
1.
Registering the hardware
on page 21
2.
Installing the appliance in a cabinet or rack
on page 21
3. Cabling the appliance on page 23
4.
Connecting power cords and applying power
on page 25
5.
Viewing boot-up status codes
on page 26
Registering the hardware
Registering the appliance hardware provides support benefits.
Steps
1. Locate the chassis serial number.
You can find the number on the packing slip, in your confirmation email, or on the appliance
after you unpack it.
2. Go to the NetApp Support Site at
mysupport.netapp.com
.
3. Determine whether you need to register the hardware:
If you are a... Follow these steps...
Existing NetApp customer
a. Sign in with your username and password.
b. Select Products > My Products.
c. Confirm that the new serial number is listed.
d. If it is not, follow the instructions for new NetApp customers.
New NetApp customer
a. Click Register Now, and create an account.
b. Select Products > Register Products.
c. Enter the product serial number and requested details.
After your registration is approved, you can download any required software.
The approval process might take up to 24 hours.
Installing the appliance in a cabinet or rack
You must install rails in your cabinet or rack and then slide the appliance onto the rails. If you
have an SG5760, you must also install the drives after installing the appliance.
Before you begin
• You have reviewed the Safety Notices document included in the box, and understand the
precautions for moving and installing hardware.
• You have the instructions packaged with the rail kit.
• You have the
Installation and Setup Instructions for the appliance.
Hardware Installation and Maintenance Guide for SG5700 Appliances 21
Installing the hardware