Item
Port
Type of port
Function
5
Management port 2 on
the E5600SG
controller
1-Gb (RJ-45) Ethernet
•
Can be bonded with management
port 1 if you want a redundant
connection to the Admin Network.
•
Can be left unwired and available
for temporary local access (IP
169.254.0.1).
•
Can be used to connect the
E5600SG controller to a service
laptop during installation, if a
DHCP-assigned IP address is not
available.
6
Four network ports on
the E5600SG
controller
10-GbE (optical)
Connect to the Grid Network and the
Client Network for StorageGRID. See
“10-GbE port connections for the
E5600SG controller.”
Related concepts
Port bond modes for the E5600SG controller ports
on page 16
Related tasks
Gathering installation information
on page 18
on page 25
Related information
VMware installation
Red Hat Enterprise Linux or CentOS installation
Ubuntu or Debian installation
Port bond modes for the E5600SG controller ports
When configuring network links for the E5600SG controller ports, you can use port bonding for the
10-GbE ports that connect to the Grid Network and optional Client Network, and the 1-GbE
management ports that connect to the optional Admin Network. Port bonding helps protect your data
by providing redundant paths between StorageGRID networks and the appliance.
Related tasks
on page 35
Network bond modes for the 10-GbE ports
The 10-GbE networking ports on the E5600SG controller support Fixed port bond mode or
Aggregate port bond mode for the Grid Network and Client Network connections.
Fixed port bond mode
Fixed mode is the default configuration for the 10-GbE networking ports.
16 | Hardware Installation and Maintenance Guide for SG5600 Appliances
Содержание StorageGRID SG5600 Series
Страница 2: ......
