7. Close the side panel and tighten the thumbscrew.
Step 6: Move a caching module
You must move the caching modules from the impaired controller modules to the
replacement controller module when replacing a controller module.
1. Locate the caching module at the rear of the controller module and remove it:
a. Press the release tab.
b. Remove the heatsink.
The storage system comes with two slots available for the caching module and only one slot is
occupied, by default.
2. Move the caching module to the new controller module, and then align the edges of the caching module
with the socket housing and gently push it into the socket.
3. Verify that the caching module is seated squarely and completely in the socket. If necessary, remove the
caching module and reseat it into the socket.
4. Reseat and push the heatsink down to engage the locking button on the caching module housing.
61