NetApp E2600, Руководство по установке

Страница: 38 / 142

30 E2600 Controller-Drive Tray Installation Guide
NOTE If your operating system is Windows Server 2008 Server Core, you might have additional installation
requirements. Refer to the Microsoft Developers Network (MSDN) for more information about Windows Server
2008 Server Core. You can access these resources from
www.microsoft.com .
3. Install the latest version of the firmware for the HBA. You can find the latest version of the firmware for the
HBA at the storage vendor website.
NOTE The remaining steps are general steps to obtain the HBA host port world wide name from the HBA BIOS
utility. If you have installed the host context agent on all of your hosts, you do not need to perform these steps. If
you are performing these steps, the actual prompts and screens vary depending on the vendor that provides the HBA.
Also, some HBA have software utilities that you can use to obtain the world wide name for the port instead of using
the BIOS utility. If a configuration uses a Fibre Channel switch, you can find the World Wide Port Name of each
port of the HBA from the name server of the switch.
4. Reboot or start your host.
5. While your host is booting, look for the prompt to access the HBA BIOS utility.
6. Select each HBA to view its HBA host port world wide name.
7. Record the following information for each host and for each HBA connected to the storage array:
—
The name of each host
—
The HBAs in each host
—
The HBA host port world wide name of each port on the HBA
The following table shows examples of the host and HBA information that you must record.
Table 12 Examples of HBA Host Port World Wide Names
Host Name Associated HBAs
HBA Host Port World
Wide Name
ICTENGINEERING Vendor x, Model y (dual port) 37:38:39:30:31:32:33:32
37:38:39:30:31:32:33:33
Vendor a, Model y (dual port) 42:38:39:30:31:32:33:42
42:38:39:30:31:32:33:44
ICTFINANCE Vendor a, Model b (single port) 57:38:39:30:31:32:33:52
Vendor x, Model b (single port) 57:38:39:30:31:32:33:53