NetApp E2600, Руководство по установке

Страница: 135 / 142

E2600 Controller-Drive Tray Installation Guide 127
„
Failed flash drive
OS+ CF+ Fx+ blank-
Use Cases Repeating Sequence
Use Case : Power-on diagnostic failure
„
A component that is not a field replaceable unit
failure has been detected.
SE+ dF+ blank-
„
A processor DIMM failure has been detected.
SE+ dF+ dash+ CF+ Px +
blank-
„
A cache memory DIMM failure has been detected.
SE+ dF+ dash+ CF+ Cx +
blank-
„
A processor DIMM or a cache memory DIMM failure
has been detected.
SE+ dF+ dash+ CF+ dx +
blank-
„
A host interface card failure has been detected.
SE+ dF+ dash+ CF+ Hx +
blank-
„
An incorrect number of cache backup devices have
been detected.
SE+ LC+ dash+ CF+ Fx +
blank-
Use Cases Repeating Sequence
Use Case : Controller is suspended and there are no other
errors to report.
„
All lockdown conditions
OH+ Lx+ blank-
Use Cases Repeating Sequence
Use Case : The controller is suspended because of
component errors.
„
Persistent processor DIMM error correcting code
(ECC) errors have been detected.
OE+ L2+ dash+ CF+ CX+
blank-
„
Persistent cache DIMM ECC errors have been
detected.
OE+ L2+ dash+ CF+ CX+
blank-
„
Persistent processor or cache DIMM ECC errors have
been detected.
OE+ L2+ dash+ CF+ CX+
blank-
Use Cases Repeating Sequence
Use Case : The controller has been suspended as a result of
persistent cache backup configuration errors.
„
The write-protect switch is set during cache restore.
OE+ LC+ blank-
Use Cases Repeating Sequence