1
Orange ring on the vertical guide rail
2
Cable chain, partially removed
b. To unlatch the cable chain, insert your finger into the orange ring and press towards the middle of the system.
c. To unplug the cable chain, carefully pull your finger toward you approximately 1 inch (2.5 cm).
Attention:
Leave the cable chain connector within the vertical guide rail.
Attention:
Possible hardware damage — If the drive tray is powered on, do not allow the cable chain connector to
touch the metal chassis.
6. Disconnect the other end of the cable chain:
a. Using a flashlight, locate the orange ring on the end of the cable chain that is attached to the horizontal guide rail in the
enclosure.
The figure shows the horizontal connector on the right and the cable chain disconnected and partially pulled out on the
left side.
8
