8.23
NETHERLANDS
Version 22.1
Version 22.1
Self-cleaning process
The self-cleaning cycle starts in one of following
circumstances:
1. Signal from the DP switch, pre-set to (0.5 bar)
2. Time interval parameter set on the controller
3. Manual start, activated by the ADI-P mobile app
(within Bluetooth range) or via the electronic
control panel.
When the flush valve opens, a strong suction force is
created on the nozzles of the scanner shaft during
flushing. This removes dirt particles from the screen
very effectively, and removes dirt from the filter during
flushing.
Mini Sigma models
Amiad's Mini Sigma series consists of the following
models:
2” Mini Sigma for a maximum of 30 m
³
/h
3” Mini Sigma for a maximum of 50 m
³
/h
4” Mini Sigma for a maximum of 80 m
³
/h
Control system
Amiad's new ADI-P controller provides unique monitoring
and control functions. The controller communicates with
Amiad's advanced, easy-to-use app with detailed filter
performance data on your mobile phone. The self-clea-
ning mechanism is controlled and monitored by the
ADI-P controller. The self-cleaning cycle is activated by
an integrated DP switch.
The ADI-P controller and mobile app also provide:
DP and flush cycle counters
Warnings: low/high pressure, low battery
Reports and data on performance history
Optionally, the limit contact (EC) can be programmed
as an alarm contact
Optionally, the second flushing contact can be
programmed as a pump start/downstream valve
Controller firmware updated via app
