iMuve-shot
unlock
HOLD
switch. If try to power on while
HOLD
switch is locked, P100 can’
t be
powered on, please unlock
HOLD
switch, then try again.
Push
Reset
In case P100 doesn’
t response to any operation, poke the RESET hole to power
off P100. You need to restart P100 to complete.
Firmware Upgrade
Before upgrade, you need to install photographic driver of P100 at first, please refer
to “Camera” for details.
NOTE: Please make sure the free space of P100 is more than
20MB before upgrade, otherwise the upgrade would be fail. Please
backup files first because the upgrading would delete all of files
which saved in P100.
After having installed photographic driver, please refer to the following steps to
upgrade.
1)
Download the latest firmware files from the website
http://www.netac.com.
2)
Enter “Setup” menu, set the item of “STORAGE
” as “PC-DEVICE”,
press OK button to confirm. Then connect P100 with the computer
through USB cable.
3)
Insert the installation CD into CD-ROM.
4)
Double click the “ISP_V5.2.exe” in “ISP” folder, system would prompt
a popup window.
13
14
