Neta DRX 3200, Руководство пользователя

Страница: 3 / 16

DRX 3200 / 3210 PROFESSIONAL SATELLITE RECEIVER
1
GENERAL
With the LCD display and front panel keypad, it is easy to adjust, operate and monitor. The rich
software and hardware features together with DVB-S, MPEG2 and BISS compliance gives
powerful performance.
After power loss, the device goes on its operation with the last settings. A programmable alarm
output signals, when any of the alarm conditions occur. At the front panel there are LEDs
indicating power, lock and alarm status. During the operation the LCD display shows the name
of the current channel, presence of signal, video, audio and the BER value or the signal
strength.
The device has a built-in cooling fan, so the units may be stacked on top of each other. Reliable
software and hardware watchdog systems restart the system safely as any failure is detected. A
keypad lock function is added against unwanted interventions by unauthorized persons.
Please read this user manual completely before installing and operating the receiver.
SAFETY
•
No user-serviceable parts inside.
•
There are some parts inside the unit carrying HIGH VOLTAGE that may injure you. Thus, do
not insert anything into the ventilation holes.
•
Small objects must be kept away from the ventilation holes of the receiver.
•
For sufficient ventilation nothing should be placed closer than 10 cm around the unit.
•
The ventilation should not be impeded by covering the ventilation openings with items.
•
No heat sources or no naked flame sources should be placed on or under the unit.
•
The receiver shall not be exposed to dripping or splashing. No objects containing liquid shall
be placed on the unit. In case of any accidental spillage or the splash of the liquid onto the
unit, unplug the receiver and call the qualified service.
•
Cleaning: You may remove the dust on the unit (never use any liquid) only after unplugging
the unit from mains outlet.
•
Do not remove the cover, refer to qualified service.
•
Your satellite receiver is designed only for indoor use and moderate climates. Do not install
the unit in humid, dusty, too hot, too cold or vibrating places and protect it against rain or
direct sunlight.
•
During intended use ensure that the mains plug is fully inserted into the wall socket.
•
Do not overload a wall outlet or extension cord as this may result in fire and electric shock.
•
Do not connect any equipment not recommended to prevent your unit against a permanent
damage or danger.
•
Always unplug the unit from mains outlet before connecting or disconnecting any cable.