Neta DRX 3200, Руководство пользователя

Страница: 12 / 16

DRX 3200 / 3210 PROFESSIONAL SATELLITE RECEIVER
10
* E m p t y S l o t
* V i a c c e s s
REMOTE ACCESS VIA RS232 (OPTIONAL)
Changing the settings, inquiry of the status, observing the alarm status, resetting the receiver,
getting Eb/N0 and setting the BISS key is possible by the commands which sent via RS232.
Sample HyperTerminal settings should be as follows;
Baudrate: Should be set to the same value on the receiver.
Data bits: 8
Parity: No
Stop bit: 1
Flow control: No
Emulation: TTY
After the settings and the connections are made correctly, enter
Help
command on the
terminal, available commands and usage of them will be displayed on the screen.
REMOTE ACCESS VIA ETHERNET (
OPTIONAL
)
Changing the settings, inquiry of the status, observing the alarm status is possible by the ASCII
commands which sent via Internet or local network.
Communication is made via a determined TCP port. IP Address, Subnet Mask and Gateway
Address settings should be made suitable with the used network and determined automatically.
For this DHCP setting should be made ‘On’.
While DHCP is ‘On’, IP Address, Subnet Mask and Gateway Address settings can not be
changed.
The receiver should be turned off and on again for the settings are being effective.
The receiver contains also a web server. Controlling the equipment and changing the settings is
possible by using a web browser as Internet Explorer or similar one.