NET UX2000 SBC, Руководство по настройке

Страница: 33 / 52

UX2000 SBC XO SIP Trunk Lync Server 2010 Configuration Guide
33
configured to transcode one list to another list between the XO SIP Trunk and Lync 2010 Server. In order
for this to work properly there has to be a Media List for the XO SIP Trunk with G.729 and/or Inband DMF
digit transfer settings and another Media List with G711 (A or U law as required) with RFC2833 digit
transfer.
The actual Transcoding configuration setting is done at the Route Table. The example below is for a call
originating on the Lync 2010 Server using G711 and the matching Route table entry for XO has
Transcoding enabled and calls out the Media list that is used for the XO SIP Trunk:
Figure 31 Media Trancoding Configuration
9 Analog Support
Lync Server 2010 supports analog devices such as phones and fax machines in its topology. The devices
can be configured with DID numbers so that they can be dialed directly from the PSTN. The analog
devices are configured to home to a configured SBC or gateway in the Lync Server 2010 topology. This
means that the configuration on the homed device needs to be able to route calls to the analog devices
from Lync Server 2010 while also routing calls to the SIP Trunk.