220-0000070 rev01
FCC Regulatory Compliance Information for Class A Equipment
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.
Caution: Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
FCC Regulatory Compliance Information for T1 Equipment
Note: This equipment complies with Part 68 of the FCC rules and bears a label that contains the
FCC registration number. This information must be provided to the telephone company if
requested. This equipment should be connected to the telephone network or premise wiring
using compatible modular plugs and cabling in compliance with the requirements of Part 68 of
the FCC rules, using the following standard jack types: (1) RJ-48H: TNE1500-P-12-XX, TAM1500-
12 or (2) RJ-48C: TNE1500-X, UIM-T1.
In the unlikely event that this equipment harms the telephone network, the telephone company
can temporarily disconnect your service. The telephone company will try to warn you in advance
of any such disconnection, but if advance notice isn’t practical, it may disconnect the service first
and notify you as soon as possible thereafter. In the event such a disconnection is deemed
necessary, you will be advised of your right to file a complaint with the FCC. Additionally, the
telephone company may, from time to time, make changes in its facilities, equipment, or
operations that could affect the operation of this equipment. If this occurs, the telephone
company is required to provide you with advance notice so you can make the modifications
necessary to maintain uninterrupted service.
Caution: This unit does not contain any user serviceable parts. Repair service and/or warranty
information may be obtained by contacting Customer Support at Net to Net Technologies, Inc.:
112 Corporate Drive, Suite 1, Portsmouth, NH 03801
(603) 427-0600 / (877) 638-2638, [email protected] / www.nettonet.com
Industry Canada Regulatory Compliance Information for Class A Equipment
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada.
