210-0000011 rev03
SAM1000-12 Bandwidth Options
LED Indicators
(A pulsing LED blinks steadily at a rate of once per second. A flashing LED blinks at a more
rapid, less constant rate.)
Regulatory Compliance
FCC Regulatory Compliance Information for Class A Equipment
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may
Bandwidth (kbps) 1,168 784
528
272
Distance (feet)
9,000 11,000 13,000
15,000
Distance (meters) 2,743 3,353
3,962
4,572
LED
State
Indication
Additional Information
PWR (Power)
solid green
unit is operational
If the Power LED is not illuminated, it is unlikely the
SAM1000-12 is receiving power and none of the LEDs
will be illuminated.
SDSL LK (Link)
pulsing
green
SDSL connection is
established and active
The SDSL link is operational and traffic is flowing.
solid green
problematic SDSL
connection
A connection exists but there is indication of a problem
with the SDSL line.
no
illumination
no SDSL connection
SDSL RX
(Receiving)
flashing
amber
SDSL activity
The port is receiving either data from the remote SDSL
modem or statistical packets from the IP DSLAM
management.
solid amber
heavy Rx traffic
The port is receiving large amounts of data from the
remote SDSL modem.
no
illumination
no activity
A link may exist but the port is not receiving any data
from the remote SDSL modem.
SDSL TX
(Transmitting)
flashing
amber
SDSL activity
The port is transmitting data to the remote SDSL
modem.
solid amber
heavy Tx traffic
The port is transmitting large amounts of data to the
remote SDSL modem.
no
illumination
no activity
A link may exist but the port is not transmitting any
data to the remote SDSL modem.
