background image

Warranty 

1.

 

Limited Warranty.  Subject to the limitations contained in Section 10 (Limitation of Remedy 

and Liability) herein, Seller warrants that (a) the licensed firmware embodied in the Goods 

will execute the programming instructions provided by Seller; (b) that the Goods 
manufactured by Seller will be free from defects in materials or workmanship under normal 

use and care; and (c) Services will be performed by trained personnel using proper 

equipment and instrumentation for the particular Service provided.  The foregoing 
warranties will apply until the expiration of the applicable warranty period.  Sensors and 

detectors are warranted against defective parts and workmanship for 24 months from the 

date of purchase and other electronic assemblies for 36 months from the date of purchase. 
Products purchased by Seller from a third party for resale to Buyer (Resale Products) shall 

carry only the warranty extended by the original manufacturer.  Buyer agrees that Seller has 

no liability for Resale Products beyond making a reasonable commercial effort to arrange for 
procurement and shipping of the Resale Products.  If Buyer discovers any warranty defects 

and notifies Seller thereof in writing during the applicable warranty period, Seller shall, at its 

option, (i) correct any errors that are found by Seller in the firmware or Services; (ii) repair or 
replace FOB point of manufacture that portion of the Goods found by Seller to be defective; 

or (iii) refund the purchase price of the defective portion of the Goods/Services.  All 

replacements or repairs necessitated by inadequate maintenance; normal wear and usage; 
unsuitable power sources or environmental conditions; accident; misuse; improper 

installation; modification; repair; use of unauthorized replacement parts; storage or 

handling; or any other cause not the fault of Seller, are not covered by this limited warranty 
and shall be replaced or repaired at Buyer’s sole expense and Seller shall not be obligated to 

pay any costs or charges incurred by Buyer or any other party except as may be agreed upon 

in writing in advance by Seller.  All costs of dismantling, reinstallation, freight and the time 
and expenses of Seller’s personnel and representatives for site travel and diagnosis under 

this limited warranty clause shall be borne by Buyer unless accepted in writing by Seller.  

Goods repaired and parts replaced by Seller during the warranty period shall be in warranty 
for the remainder of the original warranty period or 90 days, whichever is longer.  This 

limited warranty is the only warranty made by Seller and can be amended only in a writing 

signed by an authorized representative of Seller. The limited warranty herein ceases to be 
effective if Buyer fails to operate and use the Goods sold hereunder in a safe and reasonable 

manner and in accordance with any written instructions from the manufacturers. THE 

WARRANTIES AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE.  THERE ARE NO 
REPRESENTATIONS OR WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, AS TO 

MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE OR ANY OTHER MATTER WITH 

RESPECT TO ANY OF THE GOODS OR SERVICES. 

2.

 

Limitation of Remedy and Liability.  SELLER SHALL NOT BE LIABLE FOR DAMAGES CAUSED 

BY DELAY IN PERFORMANCE.  THE REMEDIES OF BUYER SET FORTH IN THE AGREEMENT ARE 
EXCLUSIVE.  IN NO EVENT, REGARDLESS OF THE FORM OF THE CLAIM OR CAUSE OF ACTION 

(WHETHER BASED IN CONTRACT, INFRINGEMENT, NEGLIGENCE, STRICT LIABILITY, OTHER 

TORT OR OTHERWISE), SHALL SELLER’S LIABILITY TO BUYER AND/OR BUYER’S CUSTOMERS 
EXCEED THE PRICE TO BUYER OF THE SPECIFIC GOODS MANUFACTURED OR SERVICES 

PROVIDED BY SELLER GIVING RISE TO THE CLAIM OR CAUSE OF ACTION.  BUYER AGREES 

THAT IN NO EVENT SHALL SELLER’S LIABILITY TO BUYER AND/OR BUYER’S CUSTOMERS 
EXTEND TO INCLUDE INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.  THE TERM 

“CONSEQUENTIAL DAMAGES” SHALL INCLUDE, BUT NOT BE LIMITED TO, LOSS OF 

ANTICIPATED PROFITS, REVENUE OR USE AND COSTS INCURRED INCLUDING WITHOUT 
LIMITATION FOR CAPITAL, FUEL AND POWER, AND CLAIMS OF BUYER’S CUSTOMERS. 

 

 

Содержание TL-MP-KIT





























Отзывы: