Net Optics OM3131-GIG-R Скачать руководство пользователя страница 7

Страница: 7 / 15

Installation Guide for GigaBit Media Converter

Connecting the GigaBit Media Converter to the
Network

When installing the GigaBit Media Converter, care must be taken in choosing

the appropriate cabling to avoid Differential Mode Delay (DMD) effects.

DMD is caused by singlemode, (1310 nanometer) laser point sources

launching into multimode cable. Optical power is concentrated in the center of

the ﬁber core, propagating in less than 5% of possible modal paths. This can

result in reduced bandwidth and/or the appearance of individual data pulses,

refracting into multiple, overlapping, light pulses at the receiver end, causing

CRC errors.

The connection requires a Mode Conditioning patch cable to provide

the

Conditioned Launch

necessary to prevent (DMD) effects. Mode

Conditioning patch cables are not used with short wave length (850 nano-

meter) lasers. Note that ﬁber cable is typically certiﬁed for a particular

bandwidth using light emitting diodes (LEDs) that provide the “Overﬁlled

Launch” condition i.e. illuminate all possible modes and ﬁbers.

For additional details see the Restricted Launch Speciﬁcation deﬁned by the

Telecommunications Industry Association. The TIA FO-2.2.1 Committee

has released two standards: (1) FOTP-203: Launched Power Distribution

Measurement Procedure for Graded-Index Multimode Fiber Transmitters, and

(2) FOTP-204: Measurement of Bandwidth on Multimode Fiber.

Содержание OM3131-GIG-R















Результаты поиска

Содержание OM3131-GIG-R

Отзывы:

Бренды по названию

Популярные бренды

Net Optics OM3131-GIG-R, Руководство по установке

Результаты поиска

Содержание OM3131-GIG-R

Отзывы:

Бренды по названию

Популярные бренды