Net Optics OM3131-GIG-R Скачать руководство пользователя страница 4

Страница: 4 / 15

Installation Guide for GigaBit Media Converter

Introduction

Thank you for purchasing the most versatile media converter available today.

Net Optics GigaBit Media Converters enable conversion between GigaBit

Fiber signals. Five models are available: an OM315-GIG and an OM315-

GIG-L for conversion between GigaBit LX and SX; an OM315-ZXSX for

conversion between GigaBit ZX to SX; an OM5555-GIG for ampliﬁcation

of a GigaBit SX signal (GigaBit SX to SX); and an OM3131-GIG for

ampliﬁcation of a GigaBit LX signal (GigaBit LX to LX).

Key Features

Compatibility

• Compatible with all major manufacturer's network equipment.

Technology

• Net Optics GigaBit Media Converters support transparent conversion of

optical signals for data rates at 1000 Mbps.

• Includes automatic Link Fault Signaling. Link Fault Signaling alerts

each host (router, switch, server) attached to a Net Optics GigaBit Media

Converter, if any of the intermediate links that separate them have failed.

If one link fails, or is not connected, the converter automatically disables

the forward link to the next device, until the unit is connected or the link is

repaired.

•

Includes Clock and Data Recovery (CDR) capability for superior perfor-

mance. This ensures that the overall jitter budget is not exceeded when

deploying pairs of converters.

Ease of Use

• All network connections are front-mounted for easy installation and

operation. Only the power connectors are side-mounted.

• Multiple LED indicators conﬁrm link status.

Support

• Throughout the lifetime of your purchase, Net Optics offers free technical

support (and has done so since our start in 1996!) Our technical support

team is available from 8 am to 5 pm Paciﬁc Time, Monday through Friday

at +1 (408) 737-7777 and via email at [email protected]. FAQs are

also available on Net Optics website at www.netoptics.com.

Содержание OM3131-GIG-R















Результаты поиска

Содержание OM3131-GIG-R

Отзывы:

Бренды по названию

Популярные бренды

Net Optics OM3131-GIG-R, Руководство по установке

Результаты поиска

Содержание OM3131-GIG-R

Отзывы:

Бренды по названию

Популярные бренды