10 GigaBit Media Converter Tap
5
Connecting to the Network
Connect Network Port A to the appropriate switch, server or router device us-
ing the duplex SC fiber cable supplied with your Converter Tap (see Figure 3).
This acts as your DCE interface .
Connect Network Port B to the appropriate switch, server or router device
using the duplex SC fiber cable supplied with your Converter Tap. This acts as
your DTE interface .
Figure 3:
Network Cable Connection Detail
Connecting the GigaBit Tap to the Monitoring Device
Remove Monitor Port dust cover taking care not to expose yourself to laser
light .
Using the Net Optics Custom Monitor Cable supplied with your Converter
Tap, connect the single-duplex end to the Tap Monitor A/B Port (see Figure 4) .
Figure 4:
Custom Monitor Cable
3 . Connect the twin-duplex end of the cable labeled DCE into the appropriate
monitoring device port to monitor the DCE link .
1 .
2 .
1 .
2 .
Network
IN
OUT
IN
OUT
A
B
TX
RX
DTE
DCE
To Monitor NIC Rx
To Monitor NIC Rx
To Monitor Port
Rx Disabled
Rx Disabled
Tx
Tx
