10 GigaBit Media Converter Tap
Installing the 10 GigaBit Media Converter Tap
The Converter Tap has three SC connectors . The two network connectors are
labeled A and B . The third connector is labeled Monitor (see Figure 1) .
Warning: The intended use of this product is in systems that contain lasers . Use
caution when handling unconnected fiber.
DANGER:
Invisible Laser Radiation when open or when operating with fiber
disconnected . AVOID DIRECT EXPOSURE TO THE BEAM . Never operate
unit with a broken fiber or with a fiber connector disconnected.
CAUTION: There are no user serviceable parts inside . Refer all servicing to
qualified service personnel.
To mount and power the Converter Tap:
If you are rack mounting the Converter Tap, insert that Converter Tap in an
available one rack unit space and secure with the four fasteners included with
the unit .
Check that connector dust covers are in place
Connect the redundant power connectors to separate power sources .
Secure the AC power connectors with the connector clips .
Check the power LEDs to verify that the Converter Tap is receiving power .
1 .
2 .
3 .
4 .
5 .
