Net.DO
Lighting Control Equipment Co.,Ltd
http://www.netdo.com.cn
FOX1024s Moving Light Controller.
PAGE: 27
1
）
Press
PROGRAM
to enter Program menu; (Indicator above
Playback Key
will be bright if there
is program recorded inside)
2
）
Press
Playback Key
to select program;
3
）
Press
EditStep
soft key(F1) to enter Step menu;
(As shown on the right)
4
）
If the program is empty, press
NEW Step
soft
key(F4) to add a new step;
5
）
Edit lighting effect by Manual-Run Fixture;
6
）
Set TIME & CROSS% of current step(Used in
Auto2 --
The speed and time of Auto2 mode)
TIME: the time from former step to current step&stay(Range: 0.1~180s), the shorter the
time is, the faster the chase will run and vice versa;
CROSS: speed of crossfade between steps. (Range: 0~100%), 0% is slowest, 100% is
fastest. For example: Cross=60%, it means using 40% of time to crossfade from the
previous step to the current step, then using 60% of time stay in the current step.
*TIPS1:
use
Cursor Key to select menu item, use
Cursor Key to modify item;
*TIPS2:
“Single-Step Program” just needs to be edited 1 step. “Multi-Step Program” can be added
new steps. The console will automatically copy the last step to the new one in order for a
coherent chase, data of current step can be cleared by pressing
CLEAR
if it’s unwanted.
*TIPS3
：
use
SETP
key to check data of every step, modified data will be saved automatically.
*TIPS4
：
new step can be added after current step by pressing
NewStep
soft key at the current step.
*TIPS5
：
current step can be deleted by pressing
DEL Step
soft key.
9.5.1 Copy Step
Operation of copying step is as follow.
Copy a whole program to the next step of current step:
E.g.: copy Program1.01 to the next step of Step3 in Program1.02:
1
）
In EditStep menu, select Step3 in Program1.02;
2
）
Press and hold
COPY
Press
Playback Key
of Program1.01 to finish copying.
Copy single step ---
this function have to be achieved by the assistance of SCENE.
E.g.: Copy Step9 in Program1.01 to Step10 in Program1.02;
1
）
In EditStep menu, select Step9 in Program1.01 and record it to a SCENE
2
）
Select Step10 in Program1.02 in EditStep menu, then call the SCENE just recorded.
9.6
Delete Program
Operation of deleting the whole program is as follow:
Press and hold
DELETE
key
Press
Playback Key
of the program to finish deleting.
9.7
Copy Program
Copy a program to another, the operation is as follow:
Press and hold
COPY
key
Press
Playback Key
(source)
Press another
Playback
Key
(target); select
Playback Page Key
first if the target is in another page.
