Net.Do FOX1024s, Руководство пользователя

Страница: 18 / 35

Net.DO
Lighting Control Equipment Co.,Ltd http://www.netdo.com.cn
FOX1024s Moving Light Controller. PAGE: 17
5.5 Other Setting
The Other… menu tree is shown on the right:
5.5.1 Data Initialized
Path: SETUP  Other…  Initial…
In Initial… menu, there are 4 soft keys as follows:
 CLR PB soft key --- Press and hold for 2 seconds to clear all programs in the console.
 CLR Scene soft key --- Press and hold for 2 seconds to clear all scenes in the console.
 CLR Patch soft key --- Press and hold for 2 seconds to clear all fixture patches in the console.
 Init All soft key --- Press and hold for 2 seconds to erase all data and restore factory settings.
Remark: Please notice to backup the useful data before data initialization.
5.5.2 Channel Fader Settings
Path: SETUP  Other…  CH Fader
There are 20 channel faders in the console, which can be set to 2 modes as follows:

attribute mode --- up to 40 attributes can be manually controlled (select fixture and modify
value).
There are totally 2 pages, 20 attributes each page, pages turned by P2 Key.
 dimmer mode --- Change Fixture No.1~20 to dimming control (output as a separate dimmer
scene). Comply with “HTP”, same as the playback output.
5.5.3 MIDI Synchronize Setting
Path: SETUP

Other…

Midi Sync
Under Midi Sync menu, Master/Slave status can be set and MIDI channels (1~16) can be selected,
consoles can be connected in parallel or receive/send MIDI code to run/record “Light Show”.
*TIPS: Under “Slave” status, Playback Faders and Flash Keys of SCENE will be locked (except while
recording “One key light show”).
Other…
Initial…
(F1)
CH Fader
(F2)
Midi Sync
(F3)