NESTOR MARTIN Fiamma FH35 Скачать руководство пользователя страница 11

10 

FH35##9710A 

CERAMIC BURNER 
 

Your stove is equipped with a 100% ceramic fiber gas burner.  Nestor Martin's ceramic burner offers 
numerous technical and esthetic advantages:  

-  Flames and glowing effect similar to a real wood fire 

-

 Highly resistant to leaks, corrosion and deformation over time 

-

 The elasticity of its gel foam ceramic fibers allow the burner to retain its heat resistant properties   

without deforming, withstanding even the most extreme temperature variations. 

-

 Increased radiant heat through the glass, while greatly decreasing radiant heat on the valve, receiver 

and battery, resulting in longer life for each of the stove’s electronic components. 

 
The burner has several positioning points and notches to help you place the ceramic logs correctly. 

 

 

 

Ceramic

 burner 

  
 
 

CONTENTS OF THE LOG KIT 
 

The kit is composed of three ceramic logs and a sack of ceramic lava rocks.  Because they are fragile, the 
logs are packaged separately to avoid damage during transport.   Using logs other than those supplied by 
the manufacturer is prohibited, as it may interfere with the proper functioning of the appliance.  
 

 

 
 
 
 

 

D  

Positioning 
points for 
ceramic logs 

Содержание Fiamma FH35






















Отзывы: