Stage 5.
Take the
Clear Plastic
panels
and slide them down the diago-
nal grooves in the Side panels.
Stage 6.
Take the
RCD Plug
,
turn it on its side
then pass it and the
cable through the
handle on the Right
Side panel from in-
side to outside.
Stage 7.
The final stage is to fit the
Light
Board
complete with light. This
fits in the slots below the han-
dles on the Side panels. To fit ,
slot the Light Board into the
Left Side panel then drop the
right end down to hold the
board in place.
Fits into slot in
Left Side panel
Fits below
handle on
Right Side
panel
