Ness HD-960H, Руководство пользователя, Страница: 73 / 161

6.4 Setup
6.4.1 Local Setup - Device
 Please make sure the network setting of DVR has been done properly prior to the remote connection setting.
6.4.1.1 Remote Site Connection Setup

Click Setup – Local Setup – Device to enter the setup and a dialog will pop up as below picture.
6.4.1.2 New Device Register
 Select “Device Connection List” on left-hand side and click [New] to register new devices.
 Describe the connection information as below. Users must fill in where information requested in bold .
- Device Name : Type the DVR name to be displayed in the server list pane. Please note that this name has no relation to
the ID registered in DVR. Users may create a name to be easily distinguished.
-
Description : Type brief description of the site.
-
IP Address : Input IP address or Domain Name of DVR (check from the SETUP>DEVICES>Network in DVR)
-
Command Port : Input Administrator’s number among port numbers set in DVR (check from the
SETUP>DEVICES>Network in DVR). Default port number is 5920
-
Stream Port : Input Video/Audio number among port numbers set in DVR (check from the SETUP>DEVICES>Network in
DVR). Default port number is 5921
-
Web Port: Input Web number among port numbers set in DVR (check from the SETUP>DEVICES>Network in DVR).
Default port number is 80 .
- Login ID : Type authorized ID of the DVR. Default ID is admin .
- Login Password : Type correspond password of the ID. Default Password is 1111
- Confirm Password : Retype the password to confirm
Device