52
Select Alarm out, Preset and Notification to use when Alarm In sensor goes off.
Link Notification displays E-mail addresses registered in
System>General>Account>User>Email
Please follow the setup procedures below.
①
Click (
) Drop-down list of Alarm In box and select Alarm In 1.
②
Select Alarm out to be worked when selected Alarm In is on. Please check
a check box of use column on Alarm Out
box. More than one alarm outputs can be set. If Click (
) ‘All’ of use box, all items are checked/unchecked at once.
③
Select cameras for preset when Alarm In is on. Please check
a check box of use column on Preset box. More than
two cameras can be set. If Click (
) ‘All’ of use box, all items are checked/unchecked at once
④
Click (
) Drop-down list of Preset to change Cameras preset. If Click (
) Drop-down list of all preset box, all items are
changed at once
⑤
Select group for notification when Alarm In is on. Please check
a check box of E-Mail box. More than two Groups can
be set.
⑥
Click (
) Drop-down list of E-mail Attachment box to attach None, JPGE or EXE
⑦
Click (
) Drop-down list of Duration column to set the duration of recorded data for attached EXE
⑧
Select Local Actions
-Beep: When Alarm In is on, it will give the alarm sound
-Popup: When Alarm In is on, it will make the popup screen on the main monitor
-Message: When Alarm In is on, the alarm message will pop up on the OSD
⑨
Repeat the above procedure for Alarm In 2 ~ Alarm In 16 (Up to 2 for
A and E Type
/ Up to 16 for
C, F Type
).
Click (
) Copy to All CH button to copy Notification & Local Actions to all channels.
To select cameras for recording when alarm In is on, Please change setting in
Record>Recording>Alarm>Record camera
4.5.1 MOTION
Please Click (
)
RELAY>MOTION
and the following screen will display.
Select Alarm out, Preset and Notification to use when a motion is detected on cameras.
Link Notification displays E-mail addresses registered in
System>General>Account>User>Email
Please follow the setup procedures below.
①
Click (
) Drop-down list of camera box and select Camera.
②
Select alarm outputs to be worked when Motion of selected Camera is detected. Please check
a check box of use
column on Alarm Out frame. More than two alarm outputs can be set. If Click (
) ‘All’ of use box, all items are
checked/unchecked at once
③
Please check
a check box of use box on Preset frame. More than two cameras can be set. If Click (
) ‘All’ of use box,
all items are checked/unchecked at once
④
Click (
) Drop-down list of Preset to change Cameras preset. If Click (
) Drop-down list of all preset box, all items are
changed at once
⑤
Select group for notification when Cam 1 is detected Motion. Please check
a check box of E-Mail box. More than two
Groups can be set.
⑥
Click (
) Drop-down list of E-mail Attachment box to attach None, JPEG or EXE
⑦
Click (
) Drop-down list of Duration box to set the duration of recorded data for attached EXE
⑧
Select Local Actions
-Beep: When selected Camera detects Motion, it will give the alarm sound
Содержание HD-960H
