17
T O E N T E R P R O G R A M M O D E
P R O G R A M M I N G
T O E X I T P R O G R A M M O D E
The D-8 Control Panel allows you to reprogram all 15 available access codes, the
2 entry times, your exit time and the follow me telephone number.
You may need to reprogram an access code because you no longer wish a user to have
access to your system or because you want to give somebody temporary access to
your system, or you may have simply forgotten your code.
You may also need to reprogram the entry or exit times of your entry/exit zones if you
find them too long or too short. You may also change the ‘Follow Me’ telephone
number in Client program mode.
For all other programming changes, talk to your installer.
Access code number 1 is called your
master
code
. Program mode can only be accessed
using your
master code
. To enter program
mode, press…
<
Program
> <
master code
> <
Enter
>
The program light will turn on and all other
lights will turn off to indicate successful
access to program mode.
N O T E : Access to Program mode can only
be done from the disarmed state.
To enter Program mode, press…
Program light ON
Press,
<Program> <Enter>
The program light will turn off and normal operating lights (mains and battery will turn on).
To exit Program mode, press…
Program
Program
..Enter..
..Enter..
Master Code
Important:
The control panel will automatically exit the Program mode if no keys are pressed
within a four minute period.
Important:
The control panel will automatically exit the Program mode if no keys are pressed
within a four minute period.
