Ness Security Products D-8, Руководство пользователя

Страница: 16 / 24

16
A L A R M M E M O R Y
The D-8 Control Panel contains an compre-
hensive Alarm Memory. The D-8 will remem-
ber Arms, low batter y, mains fail and alarms.
The memory is constantly upgraded and the
ast 20 events are always available for viewing.
To view the memory display, enter…
<Memory> <Enter> will show the last event,
pressing <Memory> again will show the
previous event etc
or
<Memory> <code> <Enter> will show the
last event, pressing <Memory> again will
show the previous event etc
This Memory display can only be selected
while the panel is in the Disarmed state.
N O T E : Entry to Program Mode will clear
the events from Alarm Memory.
Memory ..Enter..
1.
To view memory , press…
2.
OBSERVE lights .
The last event will be displayed. Press the Memory button to view the previous
event, Press the Memory button again to view the previous event etc until all
events have been displayed.
The lights are used as follows:
Light Alarm
Zone light Zone alarm
Arm light Panel armed
Tamper light Tamper alarm (siren cover, panel etc.)
Exclude Panic alarm
Battery light Low battery
Mains light Mains failure
Radio, Battery, Zone Radio Device Low Battery
Radio, Battery, Arm Radio Key Low Battery
You can access the Alarm Memory as often as required
while the Panel remains Disarmed.
You can exit Memory Mode at any time by pressing the Enter Key.