manualshive.com logo in svg

Nespresso EF 737, Руководство по обслуживанию

Поделиться
Скачать
Nespresso EF 737 Скачать руководство пользователя страница 4

4

Preface

The purpose of this Service Manual is to provide the service personnel with all necessary
information with regards to correct handling, maintenance and repair of the coffee machine
EF 737 and EF 741.
This manual should be used by the technicians as a valuable aid to guarantee the permanent
readiness for use of the machine. In order to take full advantage of all the functions, it is
absolutely necessary to follow the instructions in this manual.

Please keep this manual together with the corresponding service documentation. This way
you are assured to have the necessary information.

For fast access to information directly from the PC or MAC monitor, this manual is also
available on CD-ROM. The required utility (Adobe Acrobat), also on this CD-ROM, runs on PC
and MAC computers. At the internet address

 www.adobe.com

 you can obtain the utility Adobe

Acrobat for additional platforms, free of charge.

Содержание EF 737





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды