Nesco NC-58100 STEAM KLEAN, Инструкция по эксплуатации

Страница: 13 / 20

TIP & SAFTY PRECAUTIONS
- Do not use outdoors, for household use only.
- Do not leave steam cleaner when plugged in Unplug the electrical cord
when not in use and before servicing or cleaning.
- Do not allow to be used as a toy. Close attention is necessary when used near
children, pets and plants.
- Avoid steam flow in the direction of people, animal or other electronic
appliance.
- Use only ad described in this manual. Use only manufacturer’s recommended
accessories.
- Do not use with damaged cord or plug. If steam clean is not working as it
should, has been dropped, damaged, left outdoors, or dropped into water,
return it to a service center before using.
- Do not pull or carry by cord, use cord as a handle, close a door on cord, or
pull cord around sharp edges or corners. Keep cord away from heated
surfaces.
- Do not use extension cords or outlets with inadequate current carrying
capacity.
- Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord
- Do not handle plug or steam cleaner with wet hands or operate without
shoes.
- If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid hazard.
- Do not put any object into openings. Do not use with any opening blocked
- Store your steam cleaner indoor in a cool, dry area.
- Keep your work area well lighted.
- Never turn the appliance over or on its side more than 45 degree in respect
to vertical axis when using steam.
- Never direct steam towards people, animals, plants and equipment with
electrical components.
- Do not immerse the steam cleaner into water or other liquids. Always unplug
the power cord from the electrical socket when filling the steam cleaner.
- Never put descaling, aromatic or detergent products into the steam cleaner,
as this may damage it or make it unsafe for use.
- Metal tips on nozzles will get hot during use. Do not touch hot surfaces. Allow
the attachments to cool down before replacing them while the appliance is
being used.
- Any repair work, including the replacement of the power cord must only be
carried out by a qualified technician.
- The cover must be locked when using this product.
- Do not use in swimming pools containing water.
- Before filling, proceed as follows :
1. Unplug the power supply.
2. Relieve pressure by depressing steam delivery button.
3. Allow steamer to cool down for three minutes.
4. Relieve any built up pressure again by depressing steam delivery button.
5. Slowly unscrew safety cap and wait 5 seconds before removing.
12