Note No.
1
?
If the receiver’s memory is empty
,
then, the Radio 8113 UPMi will enter the programming mode automatically when it will be
connected to the motor and power line.
?
If the motor has end strokes, one should reach the end postition of the roller shutter and then press the switch shourtrly or touch the
programmed transmitter button 5 times.
2.2
Programming transmitter codes into the
Radio 8113 UPMi
:
?
when transmitters
Radio 8133-9, Radio 8101-5 are used one should
touch the STOP button of the transmitter;
?
when transmstters Radio 8101-2, Radio 8101-4 are used one should touch the button that needs to be programmed.
The motor will indicate that the programming was successful by the following motions:
Note No. 2
?
If the transmitter you want to programmed has been previously programmed, the motor will indicate this as follows:
.
?
If the receiver’s memory is full, the motor will indicate this as follows:
2.3
Leave the programming mode
:
touch the switch or the previously programmed button of the transmitter
.
The motor will indicate the disactivation as follows:
Note No. 3
P
The receiver will automatically leave the programming mode if one doesn’t perform any actions within 32 sec.
P
To delete the button of the transmitter, press this button
> 1 sec. after entering the programming mode (p.2.1).
P
To erase the memory completely hold the switch button or the previously programmed button more than 4 sec.
3
Operation by means of the
Radio 8113 UPMi receiver
4 Storage
Store the receiver packaged in dry buildings at temperature 0-25 C.
The receiver can make the roller shutter to perform the following commands
:
?
”UP”, “DOWN”, “COMFORT” if transmitters
Radio 8133-9, Radio 8101-5 are used
;
?
”UP”
,
“DOWN”
if transmitter
Radio 81
52
-
50
is used
;
?
Step-by-step (up-stop-down) if transmitters
Radio 81
01
-
1
, Radio 8101-
2;
Radio 8101-
4
are used
;
?
”UP”
,
“DOWN”
,
Step-by-step if a switch is used
.
5 Warranty
The warranty period is 24 months. Please, don’t throw away the manual as it is the warranty certificate.
q
p
q
q
p
p
q
p
q
p
q
p
q
p
q
p
q
p
q
p
www.neroelectronics.com
