Saturn B/M Enhanced Functions – Chapter 2. Standard
2.1
Charge Tone
General
Each telephone port can be programmed to send a tone when the
remote end subscriber answers and charging commences, for use
with a card telephone or other debiting systems.
To avoid unauthorized use, setting of the function can be protected by
means of two password levels:
"
Renter/Owner Level
"
.
Frequency and length of the charge tone is set with function no. 80,
see next page (the same tone is sent on all ports selected)
.
Selection of ports to send charge tone is made with function no. 89,
see below
.
Selecting Ports to Send Charge Tone
1
Select
ENHANCED
SETUP
function (
89
):
2
Check which ports are currently
selected, e.g. TEL.3 and TEL.5:
If no ports are set:
Current operation status (all
operations require OWNER level):
If PASSWORD PROTECTED, refer
to "
Renter/Owner Level
".
3
Change selection to ports TEL.1 and 4:
0=handset, 1-5=connectors TEL.1-5
(Use DEL to deselect ports)
4
Assign operation access level, e.g. 3:
2=operator (OPER), 3=renter (RENT)
4=owner (OWN)
5
Verify settings:
and revert to IDLE:
FUNC
ON
MORE/
HELP
9
LIGHT
YZÆ
8
VWX
TAX
1
ABC
4
JKL
3
GHI
ENHANCED
SETUP
89
ON
CHARGE TONE
PORTS: 35
ON
CHARGE TONE
PASSIVE
ON
OWN.
– –
ON
SETUP OPE.
3
ON
WHICH PORTS
14
ENTER
ENTER
ENTER
ON
CHARGE TONE
PORTS: 14
ENTER
ON
RENT.
– –
ESC
3x
MORE/
HELP
MORE/
HELP
p
Charge Tone
