Nera SatLink 1000, Руководство пользователя

Страница: 91 / 120

Nera SatLink Terminal User Guide – Revision P
89
G.3 Assembly and installation of the antenna
Different mounting structures for antennas are shown below. From the left-hand side, we have an L-
shaped wall-mount, a three-leg mount and a standard straight mount. The tube diameter is 76 mm. For a
correct mounting the surface must be vertical or horizontal, respectively.
Non-penetrating roof-mounting structures (requiring no screws or bolts) may also be used if the customer
do not want to penetrate the roof. The foot can be rectangular, “H-shaped” or have another suitable form.
It must be loaded with at least 75 kg depending on the antenna size and maximum wind force.
The tools include a screwdriver, spanners of correct size (or an adjustable spanner), and a spirit level (if
necessary). Cable straps are used to fasten the cables. A compass, a satellite finder, and a spectrum
analyser (optional) are used to position and adjust the antenna. It is an advantage to be able to measure
BER on the received signal when adjusting the antenna.
Tools and measurement
equipment.
Out-door straps used to fasten
the cables. Do not use in-door
straps (white) to fasten cables
outside the building.