Neptune R450 MC, Руководство по установке и обслуживанию, Страница: 39 / 104

Installation of the R450 MC
R450 Mini Collector Installation and Maintenance Guide 25
Mounting the Battery Box to a Large Pole
Mount the battery box to a 3-inch to 16-inch (7.62 cm to 40.64 cm)
diameter pole by completing the following steps.
1 Open the battery box and make sure the breakers are in the OFF
position. See Figure 15 on page 17.
2 Mount the battery box to a large pole. However, use the Bolt-A-
Band clamps as shown in Figure 32.
Figure 32 Battery Box Clamps
3 Install brackets onto the pole using the Bolt-A-Band clamps
provided. Be sure that the brackets are spaced 12.75 inches
(32.39 cm) apart. See Figure 33.
4 Lift the battery box then lower it so that the flange on the top rear of
the box slides over the flange of the top bracket and locks in place.
The square holes in the bottom bracket now line up with the holes
in the bottom rear of the enclosure.
Figure 33 Pole Hardware
5 Secure the box to the bottom bracket using the 5/16-inch carriage
bolts.
6 Center the battery in the battery box leaving ventilation areas free
of blockage.
7 Close the door of the battery box with the locking key.
Figure 34 Battery Box Mounted to a Large Pole
Bolt-A-Band
clamps
Pole
brackets
Prior to installing a solar unit, choose a location that faces true
south. Use a magnetic compass to help determine the correct
direction and location for your unit. You can determine true
south by using a magnetic compass corrected for magnetic
declination. (Refer to the installation, operations, and
maintenance manual for the solar power system. In addition,
refer to Appendix C.)